Operating weight
16,500kg
XCMG GR215 is a motor grader with a 3,965X610/4270X610 mm moldboard. Operating weight is 16,500 kg. Engine power is 160 kW. The figures below come from the published specification table for this model — send us the configuration you need and we confirm it against the machine before loading.
Every unit is checked for leaks, undercarriage or tyre condition and hour-meter reading at our Changzhou yard before loading.
Invoice, packing list, bill of lading and the original spec sheet ship with the machine, so customs and the end user see the same numbers.
Full technical data for this machine. Tell us your working conditions and we will confirm the attachment, bucket or blade, and tyre options before you order.
| Rated power | 160 kW |
| Rated speed | 2,200 rpm |
| Blade width × height | 3,965X610/4270X610 mm |
| Blade angle (swing) | ± 15 ° |
| Blade tilt angle | 90 ° |
| Blade cutting angle | ± 17 ° |
| Blade lift height | 28-70 mm |
| Blade dig depth | 360 mm |
| Travel speed, 1st (F / R) | 5/5 km/h |
| Travel speed, 2nd (F / R) | 8/11 km/h |
| Travel speed, 3rd (F / R) | 11/23 km/h |
| Travel speed, 4th (F / R) | 19 km/h |
| Min. turning radius | 90,000 mm |
| Max drawbar pull | 90 kN |
| Articulation angle | ± 27 ° |
| Front wheel steering angle | ± 49 ° |
| Front axle oscillation | 7.3 ° |
| Overall length | 8,970 mm |
| Overall width | 2,625 mm |
| Overall height | 3,470 mm |
| Front / rear axle spacing | 6,219 mm |
| Centre / rear axle spacing | 1,538 mm |
| Wheel track | 2,156 mm |
| Min. ground clearance | 430 mm |
| Rated working pressure | 18 kPa |
| Travel speed, 5th (F / R) | 23 km/h |
| Travel speed, 6th (F / R) | 38 km/h |
| Tyre size | 17.5-25 |
| Front tyre pressure | 0.26 kPa |
| Rear tyre pressure | 0.26 kPa |
| Front wheel tilt angle | ± 27 ° |
| Max gradeability | ≥25 ° |
Specifications are indicative and subject to the final configuration of the unit supplied. Figures may vary with optional equipment, bucket type and local emission requirements. Request the current datasheet for your market before ordering.
Same class, same inspection and export process. Compare capacities before you decide.
