Operating weight
15,400kg
XCMG GR180 is a motor grader with a 3,965X610 mm moldboard. Operating weight is 15,400 kg. Engine power is 140 kW. The figures below come from the published specification table for this model — send us the configuration you need and we confirm it against the machine before loading.
Every unit is checked for leaks, undercarriage or tyre condition and hour-meter reading at our Changzhou yard before loading.
Invoice, packing list, bill of lading and the original spec sheet ship with the machine, so customs and the end user see the same numbers.
Full technical data for this machine. Tell us your working conditions and we will confirm the attachment, bucket or blade, and tyre options before you order.
| Rated power | 140 kW |
| Rated speed | 2,000 rpm |
| Blade width × height | 3,965X610 mm |
| Blade angle (swing) | 360 ° |
| Blade tilt angle | 90 ° |
| Blade cutting angle | 28—70 ° |
| Blade lift height | 450 mm |
| Blade dig depth | 500 mm |
| Travel speed, 1st (F / R) | 5/5 km/h |
| Travel speed, 2nd (F / R) | 8/11 km/h |
| Travel speed, 3rd (F / R) | 11/23 km/h |
| Travel speed, 4th (F / R) | 19 km/h |
| Min. turning radius | 7,300 mm |
| Max drawbar pull | ≥79 kN |
| Articulation angle | ± 27 ° |
| Front wheel steering angle | ± 50 ° |
| Front axle oscillation | ± 15 ° |
| Overall length | 8,900 mm |
| Overall width | 2,625 mm |
| Overall height | 3,420 mm |
| Front / rear axle spacing | 6,219 mm |
| Centre / rear axle spacing | 1,538 mm |
| Wheel track | 2,156 mm |
| Min. ground clearance | 430 mm |
| Engine make | SC8D190.2G2 |
| Rated working pressure | 18 kPa |
| Travel speed, 5th (F / R) | 23 km/h |
| Travel speed, 6th (F / R) | 38 km/h |
| Tyre size | 17.5-25 |
| Front tyre pressure | 0.26 kPa |
| Rear tyre pressure | 0.26 kPa |
| Front wheel tilt angle | ± 17 ° |
| Max gradeability | 20 ° |
Specifications are indicative and subject to the final configuration of the unit supplied. Figures may vary with optional equipment, bucket type and local emission requirements. Request the current datasheet for your market before ordering.
Same class, same inspection and export process. Compare capacities before you decide.
