Operating weight
20,100kg
6,000 kg rated payload, a 3.3-5.5 m³ bucket and a 178 kW Weichai WD10G. Load-sensing hydraulics with a shared-flow circuit, ten brake calipers split six front and four rear, and a cooling package rated to 43 °C as standard, 50 °C as an option.
Weichai WD10G behind a three-stage air filter that takes out 93% of dust, with an oil-bath filter option for quarry work.
Shared-flow load-sensing circuit plus a relocated hydraulic tank that keeps the pump fed and extends its service life.
Six front and four rear on SEM-built axles, with split calipers so changing a disc no longer means pulling the axle.
Standard package rated to 43 °C with a 50 °C option, on damped mounts that survive rough haul roads.
Full technical data for this machine. Tell us your working conditions and we will confirm the attachment, bucket or blade, and tyre options before you order.
| Engine model | Weichai WD10G |
| Rated power | 178 kW / 239 hp |
| Rated speed | 2,000 rpm |
| Displacement | 9.73 L |
| Emission standard | Tier 2 |
| Transmission type | Countershaft, power shift |
| Gears | F4 / R4 |
| Torque converter | SEM TR200 |
| Forward I / Reverse I | 7.6 / 7.6 km/h |
| Forward II / Reverse II | 14 / 14 km/h |
| Forward III / Reverse III | 22 / 22 km/h |
| Forward IV / Reverse IV | 37 / 37 km/h |
| Axle reduction | Spiral bevel gear, single stage |
| Final drive | Planetary, single stage |
| Rear axle oscillation | ±11° |
| Implement system | Pilot hydraulic, single pump |
| Lift time | 5.3 s |
| Hydraulic cycle time | 9.75 s |
| Implement system pressure | 18 MPa |
| Service brake | Air-over-oil, dry caliper |
| Parking brake | Drum / shoe |
| Steering system | Coaxial flow amplified |
| Steering pump | Load-sensing piston pump |
| Steering system pressure | 16 MPa |
| Steering angle | 38° |
| Rated payload | 6,000 kg |
| Operating weight | 20,100 kg |
| Bucket capacity | 3.3 – 5.5 m³ |
| Wheelbase | 3,350 mm |
| Overall dimensions (L × W × H) | 8,541 × 3,092 × 3,458 mm |
| Breakout force | 197 kN |
| Drawbar pull | 194 kN |
| Dump clearance | 3,051 mm |
| B-pin height | 4,196 mm |
| Tire size | 23.5-25 |
| Tire type | Bias, 20 PR, L3 |
| Fuel tank | 252 L |
| Hydraulic oil tank | 165 L |
| Coolant | 48 L |
| Transmission oil | 53 L |
| Differential & final drives | 44 L × 2 |
Specifications are indicative and subject to the final configuration of the unit supplied. Figures may vary with optional equipment, bucket type and local emission requirements. Request the current datasheet for your market before ordering.
Same class, same inspection and export process. Compare capacities before you decide.
