Operating weight
5950kg
A 6.0-tonne class wheeled excavator, running a 49.9 kW engine. Built on the XCMG platform sold through the global dealer network, and available from stock or short lead time through our Changzhou yard.
Hydrostatic travel motors with planetary reduction; swing bearing and gearbox are the same units used across the series.
Every unit is checked for leaks, track or tyre condition and hour-meter reading at our Changzhou yard before loading.
Invoice, packing list, bill of lading and the original spec sheet ship with the machine, so customs and the end user see the same numbers.
Invoice, packing list, bill of lading and the original spec sheet ship with the machine, so customs and the end user see the same numbers.
Full technical data for this machine. Tell us your working conditions and we will confirm the exact configuration — boom, arm, bucket and attachment — before you order.
| Rated power | 49.9 kW |
| Main pump flow | 165 L/min |
| Main relief pressure | 23 MPa |
| Travel circuit pressure | 23 MPa |
| Swing circuit pressure | 23 MPa |
| Pilot pressure | 3.2 MPa |
| Travel speed (high / low) | 30/10 km/h |
| Swing speed | 10.5 rpm |
| Gradeability | 35 ° |
| Bucket digging force | 43.8 kN |
| Arm digging force | 26.5 kN |
| Max traction force | 32 kN |
| Overall length | 6185 mm |
| Overall width | 1949 mm |
| Overall height | 2910 mm |
| Upperstructure width | 1880 mm |
| Ground clearance of counterweight | 970 mm |
| Min. ground clearance | 290 mm |
| Tail swing radius | 1690 mm |
| Height of engine hood | 1970 mm |
| Max digging height | 5750 mm |
| Max dumping height | 4210 mm |
| Max digging depth | 3550 mm |
| Max digging radius | 6145 mm |
| Min swing radius | 2510 mm |
| Fuel tank | 114 L |
| Hydraulic tank | 100 L |
| Engine oil | 10.5 L |
Specifications are indicative and subject to the final configuration of the unit supplied. Figures may vary with optional equipment, bucket type and local emission requirements. Request the current datasheet for your market before ordering.
Same class, same inspection and export process. Compare capacities before you decide.
