Operating weight
14,200kg
XCMG XE155WGA is a 14.2-tonne wheeled excavator. It runs the F4.5CS4145 engine at 108 kW. Standard bucket capacity is 0.6 m³, and the working range reaches 4,620 mm of digging depth. The figures below come from the published specification table for this model — send us the configuration you need and we confirm it against the machine before loading.
Mechanical or electronically controlled diesel as published for this model; the emission standard on the plate is what we ship.
Bucket and arm breakout figures are the ISO values from the spec sheet, the number buyers compare across brands.
Every unit is checked for leaks, undercarriage or tyre condition and hour-meter reading at our Changzhou yard before loading.
Invoice, packing list, bill of lading and the original spec sheet ship with the machine, so customs and the end user see the same numbers.
Full technical data for this machine. Tell us your working conditions and we will confirm the exact configuration — boom, arm, bucket and attachment — before you order.
| Drive type | Wheeled |
| Power source | Diesel |
| Engine model | F4.5CS4145 |
| Engine make | Cummins |
| Rated power | 108 kW |
| Rated speed | 2,200 rpm |
| Number of cylinders | 4 |
| Emission standard | China IV |
| Operating weight | 14,200 kg |
| Bucket capacity | 0.6 m³ |
| Travel speed (high / low) | 37/11 km/h |
| Swing speed | 12 rpm |
| Gradeability | 35 % |
| Bucket digging force | 100 kN |
| Arm digging force | 80 kN |
| Boom length | 4,600 mm |
| Arm length | 2,100 mm |
| Wheelbase | 2,800 mm |
| Ground clearance of counterweight | 1,260 mm |
| Min. ground clearance | 380 mm |
| Rear swing radius | 2,310 mm |
| Rear swing radius | 2,310 mm |
| Length × width × height (transport) | 7,705×2510×3200 mm |
| Min. swing radius (front attachment) | 2,670 mm |
| Max digging radius | 7,780 mm |
| Max digging depth | 4,620 mm |
| Max digging height | 8,210 mm |
| Max dumping height | 5,875 mm |
| Main pump flow | 2×165 L/min |
| Main relief pressure | 34.3 kPa |
| Travel circuit pressure | 34.3 kPa |
| Swing circuit pressure | 25 kPa |
| Fuel tank | 280 L |
| Hydraulic tank | 135 L |
| Engine oil (service fill) | 12 L |
| Pilot circuit pressure | 3.9 kPa |
Specifications are indicative and subject to the final configuration of the unit supplied. Figures may vary with optional equipment, bucket type and local emission requirements. Request the current datasheet for your market before ordering.
Same class, same inspection and export process. Compare capacities before you decide.
