Operating weight
5,150 ± 50kg
XCMG XC7-TV12 is a skid steer loader rated 1,360 kg. Tipping load is 3,886 kg. Engine power is 53.7kW/2500r/min. The figures below come from the published specification table for this model — send us the configuration you need and we confirm it against the machine before loading.
Mechanical or electronically controlled diesel as published for this model; the emission standard on the plate is what we ship.
Every unit is checked for leaks, undercarriage or tyre condition and hour-meter reading at our Changzhou yard before loading.
Invoice, packing list, bill of lading and the original spec sheet ship with the machine, so customs and the end user see the same numbers.
Full technical data for this machine. Tell us your working conditions and we will confirm the attachment, bucket or blade, and tyre options before you order.
| Engine model | 4TNV98CT-NTY |
| Rated power | 53.7kW/2500r/min |
| Rated operating load | 1,360 kg |
| Tipping load | 3,886 kg |
| Fuel tank | 105 L |
| Hydraulic tank | 50 L |
| Standard bucket capacity | 0.65 m³ |
| Max torque / speed | 269–291/1625 ± 25 N·m/r/min |
| Engine make | Yanmar |
| Flow at rated speed | 95 L/min |
| Max travel speed (forward / reverse) | 8 ± 1/14 ± 1 km/h |
| Overall length (without attachment) | 2,915 mm |
| Overall width (over tyres) | 2,045 mm |
| Overall height | 4,160 mm |
| Min. ground clearance | 215 mm |
| Bucket width | 2,130 mm |
| Max dumping height | 2,615 mm |
| Dump reach at max height | 1,025 mm |
| Max bucket hinge-pin height | 3,300 mm |
| Front turning radius (with bucket) | 2,293 mm |
| Front turning radius (no attachment) | 1,468 mm |
| Rear turning radius | 1,806 mm |
| Bucket roll-back at ground level | 26 ° |
| Dump angle at max height | 40 ° |
| Bucket roll-back at max height | 84 ° |
Specifications are indicative and subject to the final configuration of the unit supplied. Figures may vary with optional equipment, bucket type and local emission requirements. Request the current datasheet for your market before ordering.
Same class, same inspection and export process. Compare capacities before you decide.
