Operating weight
33,200kg
HYUNDAI R350LVS is a 33.2-tonne crawler excavator. It runs the HE8.9 engine at 221 kW. Standard bucket capacity is 1.60 m³, and the working range reaches 6,970 mm of digging depth. The figures below come from the published specification table for this model — send us the configuration you need and we confirm it against the machine before loading.
Mechanical or electronically controlled diesel as published for this model; the emission standard on the plate is what we ship.
Every unit is checked for leaks, undercarriage or tyre condition and hour-meter reading at our Changzhou yard before loading.
Invoice, packing list, bill of lading and the original spec sheet ship with the machine, so customs and the end user see the same numbers.
Full technical data for this machine. Tell us your working conditions and we will confirm the exact configuration — boom, arm, bucket and attachment — before you order.
| Drive type | Crawler |
| Power source | Diesel |
| Engine model | HE8.9 |
| Engine make | Hyundai |
| Rated power | 221 kW |
| Rated speed | 1,850 rpm |
| Displacement | 8.9 L |
| Number of cylinders | 6 |
| Max torque | 148kgf.m/1400 N·m |
| Operating weight | 33,200 kg |
| Bucket capacity | 1.60 m³ |
| Travel speed (high / low) | 6.3/3.5 km/h |
| Swing speed | 9.8 rpm |
| Gradeability | 70 % |
| Ground pressure | 0.64 kPa |
| Max drawbar pull | 27ton kN |
| Ground clearance of counterweight | 1,200 mm |
| Rear swing radius | 3,330 mm |
| Rear swing radius | 3,330 mm |
| Length × width × height (transport) | 10,990×3280×3460 mm |
| Overall height (cab) | 3,090 mm |
| Min. swing radius (front attachment) | 4,520 mm |
| Max digging radius | 10,920 mm |
| Max digging depth | 6,970 mm |
| Max digging height | 10,540 mm |
| Max dumping height | 7,380 mm |
| Max vertical digging depth | 6,270 mm |
| Max digging radius at ground level | 10,710 mm |
| Main pump flow | 2×135 L/min |
| Travel circuit pressure | 35 kPa |
| Swing circuit pressure | 30 kPa |
| Pilot pressure | 4.0 kPa |
| Bore × stroke | 114×145 mm |
| Implement circuit pressure | 35 kPa |
| Boom cylinder (bore × stroke) | 2-150×105×1480 mm |
| Arm cylinder (bore × stroke) | 1-160×140×1685 mm |
| Bucket cylinder (bore × stroke) | 1-140×100×1285 mm |
| Fuel tank | 560 L |
| Hydraulic tank | 190 L |
| Engine oil (service fill) | 31.7 L |
| Coolant | 50 L |
Specifications are indicative and subject to the final configuration of the unit supplied. Figures may vary with optional equipment, bucket type and local emission requirements. Request the current datasheet for your market before ordering.
Same class, same inspection and export process. Compare capacities before you decide.
