Operating weight
30,200kg
HYUNDAI R305LVS is a 30.2-tonne crawler excavator. It runs the HE6.7 engine at 169 kW. Standard bucket capacity is 1.44 m³, and the working range reaches 7,180 mm of digging depth. The figures below come from the published specification table for this model — send us the configuration you need and we confirm it against the machine before loading.
Mechanical or electronically controlled diesel as published for this model; the emission standard on the plate is what we ship.
Every unit is checked for leaks, undercarriage or tyre condition and hour-meter reading at our Changzhou yard before loading.
Invoice, packing list, bill of lading and the original spec sheet ship with the machine, so customs and the end user see the same numbers.
Full technical data for this machine. Tell us your working conditions and we will confirm the exact configuration — boom, arm, bucket and attachment — before you order.
| Drive type | Crawler |
| Power source | Diesel |
| Engine model | HE6.7 |
| Engine make | Hyundai |
| Rated power | 169 kW |
| Rated speed | 1,900 rpm |
| Displacement | 6.7 L |
| Number of cylinders | 6 |
| Operating weight | 30,200 kg |
| Bucket capacity | 1.44 m³ |
| Travel speed (high / low) | 5.6/3.2 km/h |
| Swing speed | 10.2 rpm |
| Gradeability | 70 % |
| Ground pressure | 0.58 kPa |
| Max drawbar pull | 26.5ton kN |
| Boom length | 6,250 mm |
| Arm length | 2,850 mm |
| Ground clearance of counterweight | 1,190 mm |
| Rear swing radius | 3,196 mm |
| Rear swing radius | 3,196 mm |
| Length × width × height (transport) | 10,453×3200×3350 mm |
| Overall height (cab) | 3,010 mm |
| Min. swing radius (front attachment) | 4,300 mm |
| Max digging radius | 10,590 mm |
| Max digging depth | 7,180 mm |
| Max digging height | 10,030 mm |
| Max dumping height | 7,000 mm |
| Max vertical digging depth | 6,120 mm |
| Max digging radius at ground level | 10,400 mm |
| Main pump flow | 2×252 L/min |
| Travel circuit pressure | 35 kPa |
| Swing circuit pressure | 30 kPa |
| Pilot pressure | 4.0 kPa |
| Bore × stroke | 107×124 mm |
| Implement circuit pressure | 35 kPa |
| Boom cylinder (bore × stroke) | 2-140×100×1465 mm |
| Arm cylinder (bore × stroke) | 1-150×110×1765 mm |
| Bucket cylinder (bore × stroke) | 1-135×95×1185 mm |
| Fuel tank | 560 L |
| Hydraulic tank | 190 L |
| Engine oil (service fill) | 24 L |
| Coolant | 50 L |
Specifications are indicative and subject to the final configuration of the unit supplied. Figures may vary with optional equipment, bucket type and local emission requirements. Request the current datasheet for your market before ordering.
Same class, same inspection and export process. Compare capacities before you decide.
