Operating weight
22,570kg
HYUNDAI R225LVS is a 22.6-tonne crawler excavator. It runs the QSB6.7 engine at 113 kW. Standard bucket capacity is 1.05 m³, and the working range reaches 6,730 mm of digging depth. The figures below come from the published specification table for this model — send us the configuration you need and we confirm it against the machine before loading.
Mechanical or electronically controlled diesel as published for this model; the emission standard on the plate is what we ship.
Every unit is checked for leaks, undercarriage or tyre condition and hour-meter reading at our Changzhou yard before loading.
Invoice, packing list, bill of lading and the original spec sheet ship with the machine, so customs and the end user see the same numbers.
Full technical data for this machine. Tell us your working conditions and we will confirm the exact configuration — boom, arm, bucket and attachment — before you order.
| Drive type | Crawler |
| Power source | Diesel |
| Engine model | QSB6.7 |
| Engine make | Cummins |
| Rated power | 113 kW |
| Rated speed | 1,900 rpm |
| Displacement | 6.7 L |
| Number of cylinders | 6 |
| Max torque | 67kgf.m N·m |
| Operating weight | 22,570 kg |
| Bucket capacity | 1.05 m³ |
| Travel speed (high / low) | 5.5/3.4 km/h |
| Swing speed | 11 rpm |
| Gradeability | 70 % |
| Ground pressure | 6.83 kPa |
| Max drawbar pull | 20.2ton kN |
| Boom length | 5,680 mm |
| Arm length | 2,920 mm |
| Ground clearance of counterweight | 1,060 mm |
| Rear swing radius | 2,840 mm |
| Rear swing radius | 2,840 mm |
| Length × width × height (transport) | 9,550×2990×3080 mm |
| Overall height (cab) | 2,920 mm |
| Min. swing radius (front attachment) | 3,740 mm |
| Max digging radius | 9,980 mm |
| Max digging depth | 6,730 mm |
| Max digging height | 9,600 mm |
| Max dumping height | 6,780 mm |
| Max vertical digging depth | 6,280 mm |
| Max digging radius at ground level | 9,820 mm |
| Main pump flow | 2×222 L/min |
| Travel circuit pressure | 35 kPa |
| Swing circuit pressure | 26.5 kPa |
| Pilot pressure | 4.0 kPa |
| Bore × stroke | 107×124 mm |
| Implement circuit pressure | 35 kPa |
| Boom cylinder (bore × stroke) | 2-120×85×1290 mm |
| Arm cylinder (bore × stroke) | 1-140×100×1510 mm |
| Bucket cylinder (bore × stroke) | 1-120×85×1055 mm |
| Fuel tank | 400 L |
| Hydraulic tank | 160 L |
| Engine oil (service fill) | 24 L |
| Coolant | 35 L |
Specifications are indicative and subject to the final configuration of the unit supplied. Figures may vary with optional equipment, bucket type and local emission requirements. Request the current datasheet for your market before ordering.
Same class, same inspection and export process. Compare capacities before you decide.
