Operating weight
13,980kg
HYUNDAI R150LVS is a 14.0-tonne crawler excavator. Standard bucket capacity is 0.58 m³, and the working range reaches 5,550 mm of digging depth. The figures below come from the published specification table for this model — send us the configuration you need and we confirm it against the machine before loading.
Every unit is checked for leaks, undercarriage or tyre condition and hour-meter reading at our Changzhou yard before loading.
Invoice, packing list, bill of lading and the original spec sheet ship with the machine, so customs and the end user see the same numbers.
Full technical data for this machine. Tell us your working conditions and we will confirm the exact configuration — boom, arm, bucket and attachment — before you order.
| Drive type | Crawler |
| Application | General purpose |
| Operating weight | 13,980 kg |
| Bucket capacity | 0.58 m³ |
| Travel speed (high / low) | 5.5/3.2 km/h |
| Swing speed | 12 rpm |
| Gradeability | 70 % |
| Boom length | 4,600 mm |
| Arm length | 2,500 mm |
| Ground clearance of counterweight | 940 mm |
| Rear swing radius | 2,330 mm |
| Rear swing radius | 2,330 mm |
| Length × width × height (transport) | 7,820×2600×2780 mm |
| Min. swing radius (front attachment) | 2,650 mm |
| Max digging radius | 8,330 mm |
| Max digging depth | 5,550 mm |
| Max digging height | 8,500 mm |
| Max dumping height | 6,060 mm |
| Max vertical digging depth | 5,330 mm |
| Max digging radius at ground level | 8,180 mm |
| Travel circuit pressure | 36.5 kPa |
| Swing circuit pressure | 28.5 kPa |
| Implement circuit pressure | 35 kPa |
| Boom cylinder (bore × stroke) | 2-ø105×ø75×1075 mm |
| Arm cylinder (bore × stroke) | 1-ø115×ø80×1138 mm |
| Bucket cylinder (bore × stroke) | 1-ø100×ø70×840 mm |
| Fuel tank | 270 L |
| Hydraulic tank | 124 L |
| Engine oil (service fill) | 17.5 L |
Specifications are indicative and subject to the final configuration of the unit supplied. Figures may vary with optional equipment, bucket type and local emission requirements. Request the current datasheet for your market before ordering.
Same class, same inspection and export process. Compare capacities before you decide.
